Model Verification
R2026a对模型进行自我验证的模块，例如 Check Input Resolution
使用 Model Verification 库中的模块创建自验证模型，包括在仿真期间检查信号是否满足指定的限制。
模块
 | Assertion | 检查信号是否为零 |
 | Check Dynamic Gap | Check that gap of possibly varying width occurs in range of signal's amplitudes |
 | Check Dynamic Range | Check that signal falls inside range of amplitudes that varies from time step to time step |
 | Check Static Gap | Check that gap exists in signal's range of amplitudes |
 | Check Static Range | Check that signal falls inside fixed range of amplitudes |
 | Check Discrete Gradient | Check that absolute value of difference between successive samples of discrete signal is less than specified value |
 | Check Dynamic Lower Bound | Check that one signal is always less than another signal |
 | Check Dynamic Upper Bound | Check that one signal is always greater than another signal |
 | Check Input Resolution | Check that input signal has specified resolution |
 | Check Static Lower Bound | Check that signal is greater than (or optionally equal to) static lower bound |
 | Check Static Upper Bound | Check that signal is less than (or optionally equal to) static upper bound |
