Main Content

step

Improve linear regression model by adding or removing terms

collapse all in page

Syntax

NewMdl = step(mdl)
NewMdl = step(mdl,Name,Value)

Description

NewMdl = step(mdl) returns a linear regression model based on mdl using stepwise regression to add or remove one predictor.

NewMdl = step(mdl,Name,Value) specifies additional options using one or more name-value pair arguments. For example, you can specify the criterion to use to add or remove terms and the maximum number of steps to take.

example

Examples

collapse all

Open Live Script

Fit a linear regression model and use step to improve the model by adding or removing terms. This example also describes how the step function treats a categorical predictor.

Load the carsmall data set, and create a table using the Weight, Model_Year, and MPG variables.

load carsmall
tbl1 = table(MPG,Weight);
tbl1.Year = categorical(Model_Year);

Create a linear regression model of MPG as a function of Weight. 

mdl1 = fitlm(tbl1,'MPG ~ Weight')
mdl1 = 
Linear regression model:
    MPG ~ 1 + Weight

Estimated Coefficients:
                    Estimate        SE         tStat       pValue  
                   __________    _________    _______    __________

    (Intercept)        49.238       1.6411     30.002    2.7015e-49
    Weight         -0.0086119    0.0005348    -16.103    1.6434e-28


Number of observations: 94, Error degrees of freedom: 92
Root Mean Squared Error: 4.13
R-squared: 0.738,  Adjusted R-Squared: 0.735
F-statistic vs. constant model: 259, p-value = 1.64e-28

Adjust the model to include up to 'quadratic' terms by using step. Specify 'NSteps' as 5 to allow at most 5 steps of stepwise regression. Specify 'Verbose' as 2 to display the evaluation process and the decision taken at each step.

NewMdl1 = step(mdl1,'Upper','quadratic','NSteps',5,'Verbose',2)
   pValue for adding Year is 8.2284e-15
   pValue for adding Weight^2 is 0.15454
1. Adding Year, FStat = 47.5136, pValue = 8.22836e-15
   pValue for adding Weight:Year is 0.0071637
   pValue for adding Weight^2 is 0.0022303
2. Adding Weight^2, FStat = 9.9164, pValue = 0.0022303
   pValue for adding Weight:Year is 0.19519
   pValue for removing Year is 2.9042e-16

NewMdl1 = 
Linear regression model:
    MPG ~ 1 + Weight + Year + Weight^2

Estimated Coefficients:
                    Estimate         SE         tStat       pValue  
                   __________    __________    _______    __________

    (Intercept)        54.206        4.7117     11.505    2.6648e-19
    Weight          -0.016404     0.0031249    -5.2493    1.0283e-06
    Year_76            2.0887       0.71491     2.9215     0.0044137
    Year_82            8.1864       0.81531     10.041    2.6364e-16
    Weight^2       1.5573e-06    4.9454e-07      3.149     0.0022303


Number of observations: 94, Error degrees of freedom: 89
Root Mean Squared Error: 2.78
R-squared: 0.885,  Adjusted R-Squared: 0.88
F-statistic vs. constant model: 172, p-value = 5.52e-41

step creates two indicator variables, Year_76 and Year_82, because Year includes three distinct values. step does not consider the square terms of indicator variables because the square of an indicator variable is itself.

Because 'Verbose' is 2, step displays the evaluation process:

  • step computes the p-values for adding Year or Weight^2. The p-value for Year is less than both the p-value for Weight^2 and the default threshold value of 0.05; therefore, step adds Year to the model.

  • step computes the p-values for adding Weight:Year or Weight^2. Because the p-value for Weight^2 is less than the p-value for Weight:Year, the step function adds Weight^2 to the model.

  • After adding the quadratic term, step computes the p-value for adding Weight:Year again, but the p-value is greater than the threshold value. Therefore, step does not add the term to the model. step does not examine adding Weight^3 because of the upper bound specified by the 'Upper' name-value pair argument.

  • step looks for terms to remove. step already examined Weight^2, so it computes only the p-value for removing Year. Because the p-value is less than the default threshold value of 0.10, step does not remove the term.

  • Although the maximum allowed number of steps is 5, step terminates the process after two steps because the model does not improve by adding or removing a term.

step treats the two indicator variables as one predictor variable and adds Year in one step. To treat the two indicator variables as two distinct predictor variables, use dummyvar to create separate categorical variables.

temp_Year = dummyvar(tbl1.Year);
Year_76 = temp_Year(:,2);
Year_82 = temp_Year(:,3);

Create a table containing MPG, Weight, Year_76, and Year_82.

tbl2 = table(MPG,Weight,Year_76,Year_82);

Create a linear regression model of MPG as a function of Weight, and use step to improve the model.

mdl2 = fitlm(tbl2,'MPG ~ Weight');
NewMdl2 = step(mdl2,'Upper','quadratic','NSteps',5)
1. Adding Year_82, FStat = 83.1956, pValue = 1.76163e-14
2. Adding Weight:Year_82, FStat = 8.0641, pValue = 0.0055818
3. Adding Year_76, FStat = 8.1284, pValue = 0.0054157

NewMdl2 = 
Linear regression model:
    MPG ~ 1 + Year_76 + Weight*Year_82

Estimated Coefficients:
                       Estimate         SE         tStat       pValue  
                      __________    __________    _______    __________

    (Intercept)           38.844        1.5294     25.397     1.503e-42
    Weight             -0.006272    0.00042673    -14.698    1.5622e-25
    Year_76               2.0395       0.71537      2.851     0.0054157
    Year_82               19.607        3.8731     5.0623    2.2163e-06
    Weight:Year_82    -0.0046268     0.0014979    -3.0888     0.0026806


Number of observations: 94, Error degrees of freedom: 89
Root Mean Squared Error: 2.79
R-squared: 0.885,  Adjusted R-Squared: 0.88
F-statistic vs. constant model: 171, p-value = 6.54e-41

The model NewMdl2 includes the interaction term Weight:Year_82 instead of Weight^2, the term included in NewMdl1.

Input Arguments

collapse all

Linear regression model, specified as a LinearModel object created using fitlm or stepwiselm.

You can use step only if you create mdl by using fitlm with the 'RobustOpts' name-value pair argument set to the default 'off'.

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: 'Criterion','aic','Upper','quadratic','Verbose',2 instructs step to use the Akaike information criterion, include (at most) the quadratic terms in the model, and display the evaluation process and the decision taken at each step.

Criterion to add or remove terms, specified as the comma-separated pair consisting of 'Criterion' and one of these values:

  • 'sse' — p-value for an F-test of the change in the sum of squared error that results from adding or removing the term

  • 'aic' — Change in the value of Akaike information criterion (AIC)

  • 'bic' — Change in the value of Bayesian information criterion (BIC)

  • 'rsquared' — Increase in the value of R2

  • 'adjrsquared' — Increase in the value of adjusted R2

Example: 'Criterion','bic'

Model specification describing terms that cannot be removed from the model, specified as the comma-separated pair consisting of 'Lower' and one of these values:

  • A character vector or string scalar naming the model.

    ValueModel Type
    'constant'Model contains only a constant (intercept) term.
    'linear'Model contains an intercept and linear term for each predictor.
    'interactions'Model contains an intercept, linear term for each predictor, and all products of pairs of distinct predictors (no squared terms).
    'purequadratic'Model contains an intercept term and linear and squared terms for each predictor.
    'quadratic'Model contains an intercept term, linear and squared terms for each predictor, and all products of pairs of distinct predictors.
    'polyijk'Model is a polynomial with all terms up to degree i in the first predictor, degree j in the second predictor, and so on. Specify the maximum degree for each predictor by using numerals 0 though 9. The model contains interaction terms, but the degree of each interaction term does not exceed the maximum value of the specified degrees. For example, 'poly13' has an intercept and x1, x2, x22, x23, x1*x2, and x1*x22 terms, where x1 and x2 are the first and second predictors, respectively.

  • A t-by-(p + 1) matrix, or a Terms Matrix, specifying terms in the model, where t is the number of terms, p is the number of predictor variables, and +1 accounts for the response variable. A terms matrix is convenient when the number of predictors is large and you want to generate the terms programmatically.

  • A character vector or string scalar Formula in the form

    'Y ~ terms',

    where the terms are in Wilkinson Notation. The variable names in the formula must be valid MATLAB® identifiers.

Example: 'Lower','linear'

Data Types: single | double | char | string

Maximum number of steps to take, specified as the comma-separated pair consisting of 'NSteps' and a positive integer.

Example: 'NSteps',5

Data Types: single | double

Threshold for the criterion to add a term, specified as a scalar value, described in this table.

CriterionDefault ValueDecision
'SSE'0.05If the p-value of the F-statistic is less than PEnter (p-value to enter), add the term to the model.
'AIC'0If the change in the AIC of the model is less than PEnter, add the term to the model.
'BIC'0If the change in the BIC of the model is less than PEnter, add the term to the model.
'Rsquared'0.1If the increase in the R-squared value of the model is greater than PEnter, add the term to the model.
'AdjRsquared'0If the increase in the adjusted R-squared value of the model is greater than PEnter, add the term to the model.

To prevent forward stepwise regression, specify PEnter as a value that step cannot achieve.

  • When Criterion is "SSE", "AIC", or "BIC", specify PEnter as –Inf.

  • When Criterion is "Rsquared" or "AdjRsquared", specify PEnter as Inf.

Example: PEnter=0.075

Threshold for the criterion to remove a term, specified as a scalar value, described in this table.

CriterionDefault ValueDecision
"SSE"0.10If the p-value of the F-statistic is greater than PRemove (p-value to remove), remove the term from the model.
"AIC"0.01If the change in the AIC of the model is greater than PRemove, remove the term from the model.
"BIC"0.01If the change in the BIC of the model is greater than PRemove, remove the term from the model.
"Rsquared"0.05If the increase in the R-squared value of the model is less than PRemove, remove the term from the model.
"AdjRsquared"-0.05If the increase in the adjusted R-squared value of the model is less than PRemove, remove the term from the model.

At each step, the step function also checks whether a term is redundant (linearly dependent) with other terms in the current model. When any term is linearly dependent with other terms in the current model, the step function removes the redundant term, regardless of the criterion value. For more information, see Criterion.

To prevent backward stepwise regression, specify PRemove as a value that step cannot achieve.

  • When Criterion is "SSE", "AIC", or "BIC", specify PRemove as Inf.

  • When Criterion is "Rsquared" or "AdjRsquared", specify PRemove as –Inf.

Example: PRemove=0.05

Model specification describing the largest set of terms in the fit, specified as the comma-separated pair consisting of 'Upper' and one of these values:

  • A character vector or string scalar naming the model.

    ValueModel Type
    'constant'Model contains only a constant (intercept) term.
    'linear'Model contains an intercept and linear term for each predictor.
    'interactions'Model contains an intercept, linear term for each predictor, and all products of pairs of distinct predictors (no squared terms).
    'purequadratic'Model contains an intercept term and linear and squared terms for each predictor.
    'quadratic'Model contains an intercept term, linear and squared terms for each predictor, and all products of pairs of distinct predictors.
    'polyijk'Model is a polynomial with all terms up to degree i in the first predictor, degree j in the second predictor, and so on. Specify the maximum degree for each predictor by using numerals 0 though 9. The model contains interaction terms, but the degree of each interaction term does not exceed the maximum value of the specified degrees. For example, 'poly13' has an intercept and x1, x2, x22, x23, x1*x2, and x1*x22 terms, where x1 and x2 are the first and second predictors, respectively.

  • A t-by-(p + 1) matrix, or a Terms Matrix, specifying terms in the model, where t is the number of terms, p is the number of predictor variables, and +1 accounts for the response variable. A terms matrix is convenient when the number of predictors is large and you want to generate the terms programmatically.

  • A character vector or string scalar Formula in the form

    'Y ~ terms',

    where the terms are in Wilkinson Notation. The variable names in the formula must be valid MATLAB identifiers.

Example: 'Upper','quadratic'

Data Types: single | double | char | string

Control for the display of information, specified as the comma-separated pair consisting of 'Verbose' and one of these values:

  • 0 — Suppress all display.

  • 1 — Display the action taken at each step.

  • 2 — Display the evaluation process and the action taken at each step.

Example: 'Verbose',2

Output Arguments

collapse all

Linear regression model, returned as a LinearModel object

To overwrite the input argument mdl, assign the new model to mdl.

mdl = step(mdl);

More About

collapse all

Terms Matrix

A terms matrix T is a t-by-(p + 1) matrix specifying terms in a model, where t is the number of terms, p is the number of predictor variables, and +1 accounts for the response variable. The value of T(i,j) is the exponent of variable j in term i.

For example, suppose that an input includes three predictor variables x1, x2, and x3 and the response variable y in the order x1, x2, x3, and y. Each row of T represents one term:

  • [0 0 0 0] — Constant term or intercept

  • [0 1 0 0] — x2; equivalently, x1^0 * x2^1 * x3^0

  • [1 0 1 0] — x1*x3

  • [2 0 0 0] — x1^2

  • [0 1 2 0] — x2*(x3^2)

The 0 at the end of each term represents the response variable. In general, a column vector of zeros in a terms matrix represents the position of the response variable. If you have the predictor and response variables in a matrix and column vector, then you must include 0 for the response variable in the last column of each row.

Formula

A formula for model specification is a character vector or string scalar of the form 'y ~ terms'.

  • y is the response name.

  • terms represents the predictor terms in a model using Wilkinson notation.

To represent predictor and response variables, use the variable names of the table input tbl or the variable names specified by using VarNames. The default value of VarNames is {'x1','x2',...,'xn','y'}.

For example:

  • 'y ~ x1 + x2 + x3' specifies a three-variable linear model with intercept.

  • 'y ~ x1 + x2 + x3 – 1' specifies a three-variable linear model without intercept. Note that formulas include a constant (intercept) term by default. To exclude a constant term from the model, you must include –1 in the formula.

A formula includes a constant term unless you explicitly remove the term using –1.

Wilkinson Notation

Wilkinson notation describes the terms in a model. The notation relates to the terms included in the model, not to the multipliers (coefficients) of those terms.

Wilkinson notation uses these symbols:

  • + means include the next variable.

  • – means do not include the next variable.

  • : defines an interaction, which is a product of the terms.

  • * defines an interaction and all lower order terms.

  • ^ raises the predictor to a power, exactly as in * repeated, so ^ includes lower order terms as well.

  • () groups the terms.

This table shows typical examples of Wilkinson notation.

Wilkinson NotationTerms in Standard Notation
1Constant (intercept) term
x1^k, where k is a positive integerx1, x12, ..., x1k
x1 + x2x1, x2
x1*x2x1, x2, x1*x2
x1:x2x1*x2 only
–x2Do not include x2
x1*x2 + x3x1, x2, x3, x1*x2
x1 + x2 + x3 + x1:x2x1, x2, x3, x1*x2
x1*x2*x3 – x1:x2:x3x1, x2, x3, x1*x2, x1*x3, x2*x3
x1*(x2 + x3)x1, x2, x3, x1*x2, x1*x3

For more details, see Wilkinson Notation.

Algorithms

  • Stepwise regression is a systematic method for adding and removing terms from a linear or generalized linear model based on their statistical significance in explaining the response variable. The method begins with an initial model, specified using modelspec, and then compares the explanatory power of incrementally larger and smaller models.

    The step function uses forward and backward stepwise regression to determine a final model. At each step, the function searches for terms to add to the model or remove from the model based on the value of the 'Criterion' name-value pair argument.

    The default value of 'Criterion' for a linear regression model is 'sse'. In this case, stepwiselm and step of LinearModel use the p-value of an F-statistic to test models with and without a potential term at each step. If a term is not currently in the model, the null hypothesis is that the term would have a zero coefficient if added to the model. If there is sufficient evidence to reject the null hypothesis, the function adds the term to the model. Conversely, if a term is currently in the model, the null hypothesis is that the term has a zero coefficient. If there is insufficient evidence to reject the null hypothesis, the function removes the term from the model.

    Stepwise regression takes these steps when 'Criterion' is 'sse':

    1. Fit the initial model.

    2. Examine a set of available terms not in the model. If any of the terms have p-values less than an entrance tolerance (that is, if it is unlikely a term would have a zero coefficient if added to the model), add the term with the smallest p-value and repeat this step; otherwise, go to step 3.

    3. If any of the available terms in the model have p-values greater than an exit tolerance (that is, the hypothesis of a zero coefficient cannot be rejected), remove the term with the largest p-value and return to step 2; otherwise, end the process.

    At any stage, the function will not add a higher-order term if the model does not also include all lower-order terms that are subsets of the higher-order term. For example, the function will not try to add the term X1:X2^2 unless both X1 and X2^2 are already in the model. Similarly, the function will not remove lower-order terms that are subsets of higher-order terms that remain in the model. For example, the function will not try to remove X1 or X2^2 if X1:X2^2 remains in the model.

    The default value of 'Criterion' for a generalized linear model is 'Deviance'. stepwiseglm and step of GeneralizedLinearModel follow a similar procedure for adding or removing terms.

    You can specify other criteria by using the 'Criterion' name-value pair argument. For example, you can specify the change in the value of the Akaike information criterion, Bayesian information criterion, R-squared, or adjusted R-squared as the criterion to add or remove terms.

    Depending on the terms included in the initial model, and the order in which the function adds and removes terms, the function might build different models from the same set of potential terms. The function terminates when no single step improves the model. However, a different initial model or a different sequence of steps does not guarantee a better fit. In this sense, stepwise models are locally optimal, but might not be globally optimal.

  • step treats a categorical predictor as follows:

    • A model with a categorical predictor that has L levels (categories) includes L – 1 indicator variables. The model uses the first category as a reference level, so it does not include the indicator variable for the reference level. If the data type of the categorical predictor is categorical, then you can check the order of categories by using categories and reorder the categories by using reordercats to customize the reference level. For more details about creating indicator variables, see Automatic Creation of Dummy Variables.

    • step treats the group of L – 1 indicator variables as a single variable. If you want to treat the indicator variables as distinct predictor variables, create indicator variables manually by using dummyvar. Then use the indicator variables, except the one corresponding to the reference level of the categorical variable, when you fit a model. For the categorical predictor X, if you specify all columns of dummyvar(X) and an intercept term as predictors, then the design matrix becomes rank deficient.

    • Interaction terms between a continuous predictor and a categorical predictor with L levels consist of the element-wise product of the L – 1 indicator variables with the continuous predictor.

    • Interaction terms between two categorical predictors with L and M levels consist of the (L – 1)*(M – 1) indicator variables to include all possible combinations of the two categorical predictor levels.

    • You cannot specify higher-order terms for a categorical predictor because the square of an indicator is equal to itself.

    Therefore, if step adds or removes a categorical predictor, the function actually adds or removes the group of indicator variables in one step. Similarly, if step adds or removes an interaction term with a categorical predictor, the function actually adds or removes the group of interaction terms including the categorical predictor.

Alternative Functionality

  • Use stepwiselm to specify terms in a starting model and continue improving the model until no single step of adding or removing a term is beneficial.

  • Use addTerms or removeTerms to add or remove specific terms.

Extended Capabilities

Version History

Introduced in R2012a

See Also

| | |

Topics