Main Content

addAXI4StreamInterface

Class: hdlcoder.ReferenceDesign
Namespace: hdlcoder

Add AXI4-Stream interface

Since R2020a

expand all in page

Syntax

addAXI4StreamInterface('MasterChannelConnection',Master_Channel_Port,'SlaveChannelConnection',Slave_Channel_Port)
addAXI4StreamInterface('MasterChannelConnection',Master_Channel_Port,'SlaveChannelConnection',Slave_Channel_Port), Name,Value

Description

addAXI4StreamInterface('MasterChannelConnection',Master_Channel_Port,'SlaveChannelConnection',Slave_Channel_Port) adds an AXI4-Stream interface to an hdlcoder.ReferenceDesign object.

addAXI4StreamInterface('MasterChannelConnection',Master_Channel_Port,'SlaveChannelConnection',Slave_Channel_Port), Name,Value adds and defines an AXI4-Stream interface, with additional options specified by one or more Name,Value pair arguments.

Input Arguments

expand all

Reference design port connected to the IP core AXI4-Stream master interface, specified as a character vector. This port must be an AXI4-Stream slave interface. If master_channel_enable is true, you must specify master_channel_port.

Example: 'axi_dma_0/S_AXIS_S2MM'

Reference design port connected to the IP core AXI4-Stream slave interface, specified as a character vector. This port must be an AXI4-Stream master interface. If slave_channel_number is true, you must specify slave_channel_port and slave_channel_data_width.

Example: 'axi_dma_0/M_AXIS_MM2S'

Tip

To add more than one AXI4-Stream interface to your reference design, call the addAXI4StreamInterface method multiple times depending on the number of interfaces that you want to add. For each additional interface, specify a unique InterfaceID.

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Name of the AXI4-Stream interface that you add to the reference design, specified as a character vector. To create multiple AXI4-Stream interfaces, make sure that you use unique names for each interface.

Example: 'InterfaceID','AXI4-Stream1'

Master channel enable signal, specified as either true or false. By default, MasterChannelEnable is true, so you must specify master_channel_port. To use a reference design that has only a Slave channel, set MasterChannelEnable to false and do not specify the master_channel_port.

Example: 'MasterChannelEnable','false'

Slave channel enable signal, specified as either true or false. By default, SlaveChannelEnable is true, so you must specify slave_channel_port. To use a reference design that has only a Master channel, set SlaveChannelEnable to false and do not specify the slave_channel_port.

Example: 'SlaveChannelEnable','false'

Reference design master channel TDATA bit width, specified as a positive integer. By default, the master_channel_data_width is 32 bits.

Example: 'MasterChannelDataWidth',32

Reference design slave channel TDATA bit width, specified as a positive integer. By default, slave_channel_data_width is 32 bits.

Example: 'SlaveChannelDataWidth',32

Indicates if the AXI4-Stream interface is connected to the processor through a DMA. Set this value to true to enable device tree generation for the IP core AXI4-Stream interfaces.

Example: 'HasDMAConnection','true'

Reference to the corresponding S2MM DMA node in the registered device tree. Set the value to match the name of the corresponding S2MM DMA node in the registered device tree. References to device tree nodes must start with "&". To reference a node by its label, specify "&" before the label, such as "&myLabel". To reference a node by its path, specify the path inside "&{" and "}", such as "&{/myNode/childNode}".

Set MasterChannelEnable to true to specify this value.

Example: 'DeviceTreeMasterChannelDMANode','&axi4stream_s2mm'

Reference to the corresponding MM2S DMA node in the registered device tree. Set the value to match the name of the corresponding MM2S DMA node in the registered device tree. References to device tree nodes must start with "&". To reference a node by its label, specify "&" before the label, such as "&myLabel". To reference a node by its path, specify the path inside "&{" and "}", such as "&{/myNode/childNode}".

Set SlaveChannelEnable to true to specify this value.

Example: 'DeviceTreeSlaveChannelDMANode','&axi4stream_m2ss'

Version History

Introduced in R2020a

See Also

Topics