insCFMagnetometer

Model magnetometer readings for insCF sensor fusion

Since R2026a

expand all in page

    Description

    The insCFMagnetometer object models magnetometer readings for insCF sensor fusion. When estimating orientation, the filter uses magnetometer readings to correct the orientation.

    Creation

    Syntax

    sensor = insCFMagnetometer

    Description

    sensor = insCFMagnetometer creates an insCFMagnetometer sensor model object. You can specify the insCFMagnetometer object when creating an insCF object to enable the insCF object to fuse magnetometer data.

    example

    Examples

    collapse all

    Open Live Script

    Estimate orientation from recorded IMU data by using a complementary filter, represented by an insCF filter object.

    Load the rpy_9axis.mat file into the workspace. The file contains recorded accelerometer, gyroscope, and magnetometer sensor data from a device oscillating in pitch (around the y-axis), yaw (around the z-axis), and roll (around the x-axis). The file also contains the sample rate of the recording. Extract the sensor data and sample rate from the loaded workspace variable.

    ld = load("rpy_9axis.mat");
accelerometerData = ld.sensorData.Acceleration;
gyroscopeData = ld.sensorData.AngularVelocity;
magnetometerData = ld.sensorData.MagneticField;
imuSampleRate = ld.Fs; % Hz

    Create a timetable from the accelerometer, gyroscope, and magnetometer data.

    imuDataTT = timetable(accelerometerData,gyroscopeData,magnetometerData,'SampleRate',imuSampleRate,'StartTime',seconds(1/imuSampleRate),'VariableNames',{'Accelerometer', 'Gyroscope', 'Magnetometer'});

    Create an insCF filter object using sensor models for accelerometer, magnetometer, and gyroscope. To model orientation, specify insCFMotionOrientation as the motion model.

    acc = insCFAccelerometer;
mag = insCFMagnetometer;
gyro = insCFGyroscope;
motionModel = insCFMotionOrientation;
filter = insCF(acc,mag,gyro,motionModel);

    Specify the initial orientation of your sensors. You can obtain the initial orientation by using the ecompass function with the accelerometer and magnetometer data at the first time step.

    initialOrientation = [0.006727036930852 -0.131203115007920 -0.058108427699335 -0.989628162602834];
stateparts(filter,"Orientation",initialOrientation)

    Specify the sensor gains. The sensor gain value must be between 0 and 1.

    gainparts(filter,"Accelerometer",0)
gainparts(filter,"Magnetometer",0.01)

    Fuse the accelerometer, gyroscope, and magnetometer data using the insCF filter.

    outTT = estimateStates(filter,imuDataTT);

    Visualize the estimated orientation.

    t = outTT.Properties.RowTimes;
plot(t,eulerd(outTT.Orientation,"ZYX","frame"));
title("Orientation Estimate");
legend("Z-rotation","Y-rotation","X-rotation");
xlabel("Time");
ylabel("Degrees");

    Figure contains an axes object. The axes object with title Orientation Estimate, xlabel Time, ylabel Degrees contains 3 objects of type line. These objects represent Z-rotation, Y-rotation, X-rotation.

    Open Live Script

    Estimate pose (orientation and position) and velocity from IMU and GPS data by using a complementary filter, represented by an insCF filter object.

    Load the racetrackINSCFDataset.mat file, which contains a timetable with simulated accelerometer, gyroscope, magnetometer, and GPS sensor data for a racetrack-like trajectory, into the workspace. The file also contains the sample rate of the data.

    load("raceTrackINSCFDataset.mat")

    Create an insCF filter object that includes the accelerometer, gyroscope, magnetometer, and GPS sensor objects, as well as an insCFMotionPose motion model object for modeling pose.

    % Sensor object for predicting orientation
gyro = insCFGyroscope;
% Sensor objects for correcting orientation
accel = insCFAccelerometer;
mag = insCFMagnetometer;
% Sensor object for correcting position
gps = insCFGPS(ReferenceLocation=localOrigin);

% Pose motion model
motModel = insCFMotionPose;

% Filter object
filt = insCF(accel,mag,gyro,gps,motModel);

    Specify the initial position, velocity, and orientation from the measurement data.

    % Set initial position
stateparts(filt,"Position",initPos)
% Set initial orientation
stateparts(filt,"Orientation",initOrient)
% Set initial velocity
stateparts(filt,"Velocity",initVel)

    Specify the sensor gains.

    % Set Accelerometer gain
gainparts(filt,"Accelerometer",9.6335e-09)
% Set Magnetometer gain
gainparts(filt,"Magnetometer",0.01)
% Set GPS gain
gainparts(filt,"GPS",0.039246)

    Fuse the sensor data using the filter. The filter estimates pose (orientation and position) and velocity. Extract the estimated position.

    outTT = estimateStates(filt,sensorData);
estPos = outTT.Position;

    Calculate the position RMS error.

    posErr = truePos - estPos; 
pRMS = sqrt(mean(posErr.^2));
fprintf("Position RMS Error:\tX: %.3f, Y: %.3f, Z: %.3f (meters) \n", pRMS(1),pRMS(2),pRMS(3))
    Position RMS Error:	X: 0.372, Y: 0.493, Z: 0.303 (meters)

    Visualize the estimated pose against the ground truth and GPS data.

    figure
plot(truePos(:,1),truePos(:,2),".")
hold on
plot(estPos(:,1),estPos(:,2),"r.-")
gpsLocal = lla2ned(sensorData.GPS,localOrigin,"flat");
plot(gpsLocal(:,1),gpsLocal(:,2),".")

title("Pose Estimate")
legend("Ground Truth","Estimated","GPS")

grid on
xlabel("N (m)")
ylabel("E (m)")
axis equal

    Figure contains an axes object. The axes object with title Pose Estimate, xlabel N (m), ylabel E (m) contains 3 objects of type line. One or more of the lines displays its values using only markers These objects represent Ground Truth, Estimated, GPS.

    Extended Capabilities

    expand all

    C/C++ Code Generation
    Generate C and C++ code using MATLAB® Coder™.

    Version History

    Introduced in R2026a

    See Also

    Objects

    Functions