Use MATLAB and Simulink to develop, deploy, and verify wireless systems designs on AMD® Zynq® UltraScale+™ RFSoC devices.
- Characterize RF performance with data streaming between hardware and MATLAB and Simulink.
- Leverage standards-compliant (5G and LTE) and custom waveforms.
- Model and simulate hardware architectures and algorithms.
- Deploy systems to Zynq Ultrascale+ RFSoC boards using automatic HDL code and C code generation.
- Debug and verify algorithms running on hardware connected to MATLAB and Simulink test environments.
Using MATLAB for System Development on Zynq UltraScale+ RFSoC
Verify System RF Performance with Streaming Data
Use MATLAB and Simulink to stream standards-compliant 5G, LTE, and custom waveforms to and from hardware. Measure results in MATLAB to characterize RF performance for systems such as the Avnet® Zynq UltraScale+ RFSoC Development Kit with Qorvo RF Front End and Avnet Wideband mmWave Radio Development Kit for RFSoC Gen-3.
Simulate Wireless Systems for AMD Zynq UltraScale+ RFSoC Devices
Simulate and analyze SoC designs for RFSoC devices. You can partition algorithms between portions to execute on Arm Cortex-53 and IP cores and implement them in programmable logic. You can model the effective communication between processors and programmable logic via AXI4 interconnect as well as communication with off-chip DDR memory.
Code Examples and Documentation
Watch Videos
- Hardware/Software Co-Design Workflow | Developing Radio Applications for RFSoC with MATLAB & Simulink, Part 1 (9:12)
- System Specification and Design | Developing Radio Applications for RFSoC with MATLAB & Simulink, Part 2 (9:54)
- Hardware/Software Partitioning | Developing Radio Applications for RFSoC with MATLAB & Simulink, Part 3 (16:16)
Explore Products
Deploy Models to AMD Zynq UltraScale+ RFSoC Boards
Configure the RF data converters of RFSoC devices directly from MATLAB. Generate HDL code and embedded C code from algorithm models in Simulink, and deploy systems to prototype hardware like the AMD Zynq UltraScale+ RFSoC ZCU111 Evaluation Kit, Zynq UltraScale+ RFSoC ZCU216 Evaluation Kit, and Zynq UltraScale+ RFSoC ZCU208 Evaluation Kit.
Explore Products
Verify Deployed Algorithms on Zynq UltraScale+ RFSoC Hardware
Rather than writing a Verilog testbench or a VHDL testbench, you can verify your HDL code with MATLAB and Simulink testbenches using HDL cosimulation. Supported simulators include ModelSim™ and Questa™ from Siemens EDA and Cadence® Xcelium®.
Code Examples and Documentation
Get a Free Trial
30 days of exploration at your fingertips.
Let us know how we can help you.
Contact us for a custom evaluation, and get pricing based on your needs.
