Main Content

calibrate

Simulate and collect ranges of a deep neural network

collapse all in page

Syntax

calResults = calibrate(quantObj,calData)
calResults = calibrate(quantObj,calData,Name,Value)

Description

example

calResults = calibrate(quantObj,calData) exercises the network and collects the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network specified by dlquantizer object, quantObj, using the data specified by calData.

calResults = calibrate(quantObj,calData,Name,Value) calibrates the network with additional options specified by one or more name-value pair arguments.

This function requires Deep Learning Toolbox Model Quantization Library. To learn about the products required to quantize a deep neural network, see Quantization Workflow Prerequisites.

Examples

collapse all

This example uses:

Open Live Script

This example shows how to quantize learnable parameters in the convolution layers of a neural network for GPU and explore the behavior of the quantized network. In this example, you quantize the squeezenet neural network after retraining the network to classify new images according to the Train Deep Learning Network to Classify New Images example. In this example, the memory required for the network is reduced approximately 75% through quantization while the accuracy of the network is not affected.

Load the pretrained network. net is the output network of the Train Deep Learning Network to Classify New Images example.

load squeezenetmerch
net
net = 
  DAGNetwork with properties:

         Layers: [68×1 nnet.cnn.layer.Layer]
    Connections: [75×2 table]
     InputNames: {'data'}
    OutputNames: {'new_classoutput'}

Define calibration and validation data to use for quantization.

The calibration data is used to collect the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. For the best quantization results, the calibration data must be representative of inputs to the network.

The validation data is used to test the network after quantization to understand the effects of the limited range and precision of the quantized convolution layers in the network.

In this example, use the images in the MerchData data set. Define an augmentedImageDatastore object to resize the data for the network. Then, split the data into calibration and validation data sets.

unzip('MerchData.zip');
imds = imageDatastore('MerchData', ...
    'IncludeSubfolders',true, ...
    'LabelSource','foldernames');
[calData, valData] = splitEachLabel(imds, 0.7, 'randomized');
aug_calData = augmentedImageDatastore([227 227], calData);
aug_valData = augmentedImageDatastore([227 227], valData);

Create a dlquantizer object and specify the network to quantize.

quantObj = dlquantizer(net);

Define a metric function to use to compare the behavior of the network before and after quantization. This example uses the hComputeModelAccuracy metric function.

function accuracy = hComputeModelAccuracy(predictionScores, net, dataStore)
%% Computes model-level accuracy statistics
    
    % Load ground truth
    tmp = readall(dataStore);
    groundTruth = tmp.response;
    
    % Compare with predicted label with actual ground truth 
    predictionError = {};
    for idx=1:numel(groundTruth)
        [~, idy] = max(predictionScores(idx,:)); 
        yActual = net.Layers(end).Classes(idy);
        predictionError{end+1} = (yActual == groundTruth(idx)); %#ok
    end
    
    % Sum all prediction errors.
    predictionError = [predictionError{:}];
    accuracy = sum(predictionError)/numel(predictionError);
end

Specify the metric function in a dlquantizationOptions object.

quantOpts = dlquantizationOptions('MetricFcn',{@(x)hComputeModelAccuracy(x, net, aug_valData)});

Use the calibrate function to exercise the network with sample inputs and collect range information. The calibrate function exercises the network and collects the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. The function returns a table. Each row of the table contains range information for a learnable parameter of the optimized network.

calResults = calibrate(quantObj, aug_calData)
calResults=121×5 table
        Optimized Layer Name         Network Layer Name     Learnables / Activations    MinValue     MaxValue
    ____________________________    ____________________    ________________________    _________    ________

    {'conv1_Weights'           }    {'conv1'           }           "Weights"             -0.91985     0.88489
    {'conv1_Bias'              }    {'conv1'           }           "Bias"                -0.07925     0.26343
    {'fire2-squeeze1x1_Weights'}    {'fire2-squeeze1x1'}           "Weights"                -1.38      1.2477
    {'fire2-squeeze1x1_Bias'   }    {'fire2-squeeze1x1'}           "Bias"                -0.11641     0.24273
    {'fire2-expand1x1_Weights' }    {'fire2-expand1x1' }           "Weights"              -0.7406     0.90982
    {'fire2-expand1x1_Bias'    }    {'fire2-expand1x1' }           "Bias"               -0.060056     0.14602
    {'fire2-expand3x3_Weights' }    {'fire2-expand3x3' }           "Weights"             -0.74397     0.66905
    {'fire2-expand3x3_Bias'    }    {'fire2-expand3x3' }           "Bias"               -0.051778    0.074239
    {'fire3-squeeze1x1_Weights'}    {'fire3-squeeze1x1'}           "Weights"              -0.7712     0.68917
    {'fire3-squeeze1x1_Bias'   }    {'fire3-squeeze1x1'}           "Bias"                -0.10138     0.32675
    {'fire3-expand1x1_Weights' }    {'fire3-expand1x1' }           "Weights"             -0.72035      0.9743
    {'fire3-expand1x1_Bias'    }    {'fire3-expand1x1' }           "Bias"               -0.067029     0.30425
    {'fire3-expand3x3_Weights' }    {'fire3-expand3x3' }           "Weights"             -0.61443      0.7741
    {'fire3-expand3x3_Bias'    }    {'fire3-expand3x3' }           "Bias"               -0.053613     0.10329
    {'fire4-squeeze1x1_Weights'}    {'fire4-squeeze1x1'}           "Weights"              -0.7422      1.0877
    {'fire4-squeeze1x1_Bias'   }    {'fire4-squeeze1x1'}           "Bias"                -0.10885     0.13881
      ⋮

Use the validate function to quantize the learnable parameters in the convolution layers of the network and exercise the network. The function uses the metric function defined in the dlquantizationOptions object to compare the results of the network before and after quantization. 

valResults = validate(quantObj, aug_valData, quantOpts)
valResults = struct with fields:
       NumSamples: 20
    MetricResults: [1×1 struct]
       Statistics: [2×2 table]

Examine the validation output to see the performance of the quantized network.

valResults.MetricResults.Result
ans=2×2 table
    NetworkImplementation    MetricOutput
    _____________________    ____________

     {'Floating-Point'}           1      
     {'Quantized'     }           1      


valResults.Statistics
ans=2×2 table
    NetworkImplementation    LearnableParameterMemory(bytes)
    _____________________    _______________________________

     {'Floating-Point'}                2.9003e+06           
     {'Quantized'     }                7.3393e+05

In this example, the memory required for the network was reduced approximately 75% through quantization. The accuracy of the network is not affected.

The weights, biases, and activations of the convolution layers of the network specified in the dlquantizer object now use scaled 8-bit integer data types.

This example shows how to quantize learnable parameters in the convolution layers of a neural network and explore the behavior of the quantized network. In this example, you quantize the logo recognition network (LogoNet). Quantization helps reduce the memory requirement of a deep neural network by quantizing weights, biases and activations of network layers to 8-bit scaled integer data types. Use MATLAB® to retrieve the prediction results from the target device.

This example uses the products listed under FPGA in Quantization Workflow Prerequisites.

Create a file in your current working directory called getLogoNetwork.m. Enter these lines into the file:

function net = getLogoNetwork()
    data = getLogoData();
    net  = data.convnet;
end

function data = getLogoData()
    if ~isfile('LogoNet.mat')
        url = 'https://www.mathworks.com/supportfiles/gpucoder/cnn_models/logo_detection/LogoNet.mat';
        websave('LogoNet.mat',url);
    end
    data = load('LogoNet.mat');
end

Load the pretrained network.

snet = getLogoNetwork();
snet = 

  SeriesNetwork with properties:

         Layers: [22×1 nnet.cnn.layer.Layer]
     InputNames: {'imageinput'}
    OutputNames: {'classoutput'}

Define calibration and validation data to use for quantization.

The calibration data is used to collect the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. For the best quantization results, the calibration data must be representative of inputs to the network.

The validation data is used to test the network after quantization to understand the effects of the limited range and precision of the quantized convolution layers in the network.

This example uses the images in the logos_dataset data set. Define an imageDatastore, then split the data into calibration and validation data sets.

curDir = pwd;
newDir = fullfile(matlabroot,'examples','deeplearning_shared','data','logos_dataset.zip');
copyfile(newDir,curDir);
unzip('logos_dataset.zip');
imageData = imageDatastore(fullfile(curDir,'logos_dataset'),...
 'IncludeSubfolders',true,'FileExtensions','.JPG','LabelSource','foldernames');
[calibrationData,validationData] = splitEachLabel(imageData,0.5,'randomized');

Create a dlquantizer object and specify the network to quantize. Set the execution environment for the quantized network to FPGA.

dlQuantObj = dlquantizer(snet,'ExecutionEnvironment','FPGA');

Use the calibrate function to exercise the network with sample inputs and collect range information. The calibrate function exercises the network and collects the dynamic ranges of the weights and biases in the convolution and fully connected layers of the network and the dynamic ranges of the activations in all layers of the network. The function returns a table. Each row of the table contains range information for a learnable parameter of the optimized network.

 dlQuantObj.calibrate(calibrationData)
ans = 
        Optimized Layer Name        Network Layer Name    Learnables / Activations     MinValue       MaxValue 
    ____________________________    __________________    ________________________    ___________    __________

    {'conv_1_Weights'          }      {'conv_1'    }           "Weights"                -0.048978      0.039352
    {'conv_1_Bias'             }      {'conv_1'    }           "Bias"                     0.99996        1.0028
    {'conv_2_Weights'          }      {'conv_2'    }           "Weights"                -0.055518      0.061901
    {'conv_2_Bias'             }      {'conv_2'    }           "Bias"                 -0.00061171       0.00227
    {'conv_3_Weights'          }      {'conv_3'    }           "Weights"                -0.045942      0.046927
    {'conv_3_Bias'             }      {'conv_3'    }           "Bias"                  -0.0013998     0.0015218
    {'conv_4_Weights'          }      {'conv_4'    }           "Weights"                -0.045967         0.051
    {'conv_4_Bias'             }      {'conv_4'    }           "Bias"                    -0.00164     0.0037892
    {'fc_1_Weights'            }      {'fc_1'      }           "Weights"                -0.051394      0.054344
    {'fc_1_Bias'               }      {'fc_1'      }           "Bias"                 -0.00052319    0.00084454
    {'fc_2_Weights'            }      {'fc_2'      }           "Weights"                 -0.05016      0.051557
    {'fc_2_Bias'               }      {'fc_2'      }           "Bias"                  -0.0017564     0.0018502
    {'fc_3_Weights'            }      {'fc_3'      }           "Weights"                -0.050706       0.04678
    {'fc_3_Bias'               }      {'fc_3'      }           "Bias"                    -0.02951      0.024855
    {'imageinput'              }      {'imageinput'}           "Activations"                    0           255
    {'imageinput_normalization'}      {'imageinput'}           "Activations"              -139.34        198.72

Create a target object with a custom name for your target device and an interface to connect your target device to the host computer.

hTarget = dlhdl.Target('Intel','Interface','JTAG');

Define a metric function to use to compare the behavior of the network before and after quantization. Save this function in a local file.

function accuracy = hComputeModelAccuracy(predictionScores,net,dataStore)
%% hComputeModelAccuracy test helper function computes model level accuracy statistics

% Copyright 2020 The MathWorks, Inc.
    
    % Load ground truth 
    groundTruth = dataStore.Labels;
    
    % Compare predicted label with ground truth 
    predictionError = {};
    for idx=1:numel(groundTruth)
        [~, idy] = max(predictionScores(idx,:)); 
        yActual = net.Layers(end).Classes(idy);
        predictionError{end+1} = (yActual == groundTruth(idx)); %#ok
    end
    
    % Sum all prediction errors.
    predictionError = [predictionError{:}];
    accuracy = sum(predictionError)/numel(predictionError);
end

Specify the metric function and FPGA execution environment options in a dlquantizationOptions object.

options = dlquantizationOptions('MetricFcn', ...
    {@(x)hComputeModelAccuracy(x,snet,validationData)},'Bitstream','arria10soc_int8',...
'Target',hTarget);

Compile and deploy the quantized network. Use the validate function to quantize the learnable parameters in the convolution layers of the network and exercise the network. This function uses the output of the compile function to program the FPGA board by using the programming file. It also downloads the network weights and biases. The deploy function checks for the Intel® Quartus® tool and the supported tool version. It then programs the FPGA device using the sof file, displays progress messages, and the time it takes to deploy the network. The validate function uses the metric function defined in the dlquantizationOptions object to compare the results of the network before and after quantization.

prediction = dlQuantObj.validate(validationData,options);
           offset_name          offset_address     allocated_space 
    _______________________    ______________    _________________

    "InputDataOffset"           "0x00000000"     "48.0 MB"        
    "OutputResultOffset"        "0x03000000"     "4.0 MB"         
    "SystemBufferOffset"        "0x03400000"     "60.0 MB"        
    "InstructionDataOffset"     "0x07000000"     "8.0 MB"         
    "ConvWeightDataOffset"      "0x07800000"     "8.0 MB"         
    "FCWeightDataOffset"        "0x08000000"     "12.0 MB"        
    "EndOffset"                 "0x08c00000"     "Total: 140.0 MB"

### Programming FPGA Bitstream using JTAG...
### Programming the FPGA bitstream has been completed successfully.
### Loading weights to Conv Processor.
### Conv Weights loaded. Current time is 16-Jul-2020 12:45:10
### Loading weights to FC Processor.
### FC Weights loaded. Current time is 16-Jul-2020 12:45:26
### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13570959                  0.09047                      30          380609145             11.8
    conv_module           12667786                  0.08445 
        conv_1             3938907                  0.02626 
        maxpool_1          1544560                  0.01030 
        conv_2             2910954                  0.01941 
        maxpool_2           577524                  0.00385 
        conv_3             2552707                  0.01702 
        maxpool_3           676542                  0.00451 
        conv_4              455434                  0.00304 
        maxpool_4            11251                  0.00008 
    fc_module               903173                  0.00602 
        fc_1                536164                  0.00357 
        fc_2                342643                  0.00228 
        fc_3                 24364                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13570364                  0.09047                      30          380612682             11.8
    conv_module           12667103                  0.08445 
        conv_1             3939296                  0.02626 
        maxpool_1          1544371                  0.01030 
        conv_2             2910747                  0.01940 
        maxpool_2           577654                  0.00385 
        conv_3             2551829                  0.01701 
        maxpool_3           676548                  0.00451 
        conv_4              455396                  0.00304 
        maxpool_4            11355                  0.00008 
    fc_module               903261                  0.00602 
        fc_1                536206                  0.00357 
        fc_2                342688                  0.00228 
        fc_3                 24365                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13571561                  0.09048                      30          380608338             11.8
    conv_module           12668340                  0.08446 
        conv_1             3939070                  0.02626 
        maxpool_1          1545327                  0.01030 
        conv_2             2911061                  0.01941 
        maxpool_2           577557                  0.00385 
        conv_3             2552082                  0.01701 
        maxpool_3           676506                  0.00451 
        conv_4              455582                  0.00304 
        maxpool_4            11248                  0.00007 
    fc_module               903221                  0.00602 
        fc_1                536167                  0.00357 
        fc_2                342643                  0.00228 
        fc_3                 24409                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13569862                  0.09047                      30          380613327             11.8
    conv_module           12666756                  0.08445 
        conv_1             3939212                  0.02626 
        maxpool_1          1543267                  0.01029 
        conv_2             2911184                  0.01941 
        maxpool_2           577275                  0.00385 
        conv_3             2552868                  0.01702 
        maxpool_3           676438                  0.00451 
        conv_4              455353                  0.00304 
        maxpool_4            11252                  0.00008 
    fc_module               903106                  0.00602 
        fc_1                536050                  0.00357 
        fc_2                342645                  0.00228 
        fc_3                 24409                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13570823                  0.09047                      30          380619836             11.8
    conv_module           12667607                  0.08445 
        conv_1             3939074                  0.02626 
        maxpool_1          1544519                  0.01030 
        conv_2             2910636                  0.01940 
        maxpool_2           577769                  0.00385 
        conv_3             2551800                  0.01701 
        maxpool_3           676795                  0.00451 
        conv_4              455859                  0.00304 
        maxpool_4            11248                  0.00007 
    fc_module               903216                  0.00602 
        fc_1                536165                  0.00357 
        fc_2                342643                  0.00228 
        fc_3                 24406                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


          offset_name          offset_address     allocated_space 
    _______________________    ______________    _________________

    "InputDataOffset"           "0x00000000"     "48.0 MB"        
    "OutputResultOffset"        "0x03000000"     "4.0 MB"         
    "SystemBufferOffset"        "0x03400000"     "60.0 MB"        
    "InstructionDataOffset"     "0x07000000"     "8.0 MB"         
    "ConvWeightDataOffset"      "0x07800000"     "8.0 MB"         
    "FCWeightDataOffset"        "0x08000000"     "12.0 MB"        
    "EndOffset"                 "0x08c00000"     "Total: 140.0 MB"

### FPGA bitstream programming has been skipped as the same bitstream is already loaded on the target FPGA.
### Deep learning network programming has been skipped as the same network is already loaded on the target FPGA.
### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13572329                  0.09048                      10          127265075             11.8
    conv_module           12669135                  0.08446 
        conv_1             3939559                  0.02626 
        maxpool_1          1545378                  0.01030 
        conv_2             2911243                  0.01941 
        maxpool_2           577422                  0.00385 
        conv_3             2552064                  0.01701 
        maxpool_3           676678                  0.00451 
        conv_4              455657                  0.00304 
        maxpool_4            11227                  0.00007 
    fc_module               903194                  0.00602 
        fc_1                536140                  0.00357 
        fc_2                342688                  0.00228 
        fc_3                 24364                  0.00016 
 * The clock frequency of the DL processor is: 150MHz


### Finished writing input activations.
### Running single input activations.


              Deep Learning Processor Profiler Performance Results

                   LastLayerLatency(cycles)   LastLayerLatency(seconds)       FramesNum      Total Latency     Frames/s
                         -------------             -------------              ---------        ---------       ---------
Network                   13572527                  0.09048                      10          127266427             11.8
    conv_module           12669266                  0.08446 
        conv_1             3939776                  0.02627 
        maxpool_1          1545632                  0.01030 
        conv_2             2911169                  0.01941 
        maxpool_2           577592                  0.00385 
        conv_3             2551613                  0.01701 
        maxpool_3           676811                  0.00451 
        conv_4              455418                  0.00304 
        maxpool_4            11348                  0.00008 
    fc_module               903261                  0.00602 
        fc_1                536205                  0.00357 
        fc_2                342689                  0.00228 
        fc_3                 24365                  0.00016 
 * The clock frequency of the DL processor is: 150MHz

The weights, biases, and activations of the convolution layers of the network specified in the dlquantizer object now use scaled 8-bit integer data types.

Examine the MetricResults.Result field of the validation output to see the performance of the quantized network.

validateOut = prediction.MetricResults.Result
ans = 
    NetworkImplementation    MetricOutput
    _____________________    ____________

     {'Floating-Point'}         0.9875   
     {'Quantized'     }         0.9875

Examine the QuantizedNetworkFPS field of the validation output to see the frames per second performance of the quantized network.

prediction.QuantizedNetworkFPS
ans = 11.8126

This example uses:

Open Live Script

This example shows how to quantize and validate a neural network for a CPU target. This workflow is similar to other execution environments, but before validating you must establish a raspi connection.

First, load your network. This example uses the pretrained network squeezenet.

load squeezenetmerch
net
net = 
  DAGNetwork with properties:

         Layers: [68×1 nnet.cnn.layer.Layer]
    Connections: [75×2 table]
     InputNames: {'data'}
    OutputNames: {'new_classoutput'}

Then define your calibration and validation data, calDS and valDS respectively.

unzip('MerchData.zip');
imds = imageDatastore('MerchData', ...
    'IncludeSubfolders',true, ...
    'LabelSource','foldernames');
[calData, valData] = splitEachLabel(imds, 0.7, 'randomized');
aug_calData = augmentedImageDatastore([227 227],calData);
aug_valData = augmentedImageDatastore([227 227],valData);

Create the dlquantizer object and specify a CPU execution environment.

dq =  dlquantizer(net,'ExecutionEnvironment','CPU') 
dq = 
  dlquantizer with properties:

           NetworkObject: [1×1 DAGNetwork]
    ExecutionEnvironment: 'CPU'

Calibrate the network.

calResults = calibrate(dq,aug_calData)
Attempt to calibrate with host GPU errored with the message: 
Unable to find a supported GPU device. For more information on GPU support, see GPU Support by Release. 
Reverting to use host CPU. 

calResults=121×5 table
        Optimized Layer Name         Network Layer Name     Learnables / Activations    MinValue     MaxValue
    ____________________________    ____________________    ________________________    _________    ________

    {'conv1_Weights'           }    {'conv1'           }           "Weights"             -0.91985     0.88489
    {'conv1_Bias'              }    {'conv1'           }           "Bias"                -0.07925     0.26343
    {'fire2-squeeze1x1_Weights'}    {'fire2-squeeze1x1'}           "Weights"                -1.38      1.2477
    {'fire2-squeeze1x1_Bias'   }    {'fire2-squeeze1x1'}           "Bias"                -0.11641     0.24273
    {'fire2-expand1x1_Weights' }    {'fire2-expand1x1' }           "Weights"              -0.7406     0.90982
    {'fire2-expand1x1_Bias'    }    {'fire2-expand1x1' }           "Bias"               -0.060056     0.14602
    {'fire2-expand3x3_Weights' }    {'fire2-expand3x3' }           "Weights"             -0.74397     0.66905
    {'fire2-expand3x3_Bias'    }    {'fire2-expand3x3' }           "Bias"               -0.051778    0.074239
    {'fire3-squeeze1x1_Weights'}    {'fire3-squeeze1x1'}           "Weights"              -0.7712     0.68917
    {'fire3-squeeze1x1_Bias'   }    {'fire3-squeeze1x1'}           "Bias"                -0.10138     0.32675
    {'fire3-expand1x1_Weights' }    {'fire3-expand1x1' }           "Weights"             -0.72035      0.9743
    {'fire3-expand1x1_Bias'    }    {'fire3-expand1x1' }           "Bias"               -0.067029     0.30425
    {'fire3-expand3x3_Weights' }    {'fire3-expand3x3' }           "Weights"             -0.61443      0.7741
    {'fire3-expand3x3_Bias'    }    {'fire3-expand3x3' }           "Bias"               -0.053613     0.10329
    {'fire4-squeeze1x1_Weights'}    {'fire4-squeeze1x1'}           "Weights"              -0.7422      1.0877
    {'fire4-squeeze1x1_Bias'   }    {'fire4-squeeze1x1'}           "Bias"                -0.10885     0.13881
      ⋮

Use the MATLAB Support Package for Raspberry Pi function, raspi, to create a connection to the Raspberry Pi. In the following code, replace:

  • raspiname with the name or address of your Raspberry Pi

  • username with your user name

  • password with your password

%  r = raspi('raspiname','username','password');

Validate the quantized network with the validate function.

valResults = validate(dq,aug_valData)
### Starting application: 'codegen/lib/validate_predict_int8/pil/validate_predict_int8.elf'
    To terminate execution: clear validate_predict_int8_pil
### Launching application validate_predict_int8.elf...
### Host application produced the following standard output (stdout) and standard error (stderr) messages:

valResults = struct with fields:
       NumSamples: 20
    MetricResults: [1×1 struct]
       Statistics: []

Examine the validation output to see the performance of the quantized network.

valResults.MetricResults.Result
ans=2×2 table
    NetworkImplementation    MetricOutput
    _____________________    ____________

     {'Floating-Point'}          0.95    
     {'Quantized'     }          0.95

Input Arguments

collapse all

Network to quantize, specified as a dlquantizer object.

Data to use for calibration of quantized network, specified as an imageDatastore object, an augmentedImageDatastore object, a pixelLabelImageDatastore (Computer Vision Toolbox) object, or a CombinedDatastore object.

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: calResults = calibrate(quantObj,calData,'UseGPU','on')

Size of the mini-batches to use for calibration, specified as a positive integer. Larger mini-batch sizes require more memory, but can lead to faster calibration.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64

Whether to use host GPU for calibration, specified as one of the following:

  • 'auto' — Use host GPU for calibration if one is available. Otherwise, use host CPU for calibration.

  • 'on' — Use host GPU for calibration.

  • 'off' — Use host CPU for calibration.

Data Types: char

Output Arguments

collapse all

Dynamic ranges of layers of the network, returned as a table. Each row in the table displays the minimum and maximum values of a learnable parameter of a convolution layer of the optimized network. The software uses these minimum and maximum values to determine the scaling for the data type of the quantized parameter.

Version History

Introduced in R2020a

expand all

See Also

Apps

Functions

Topics