无线通信

设计、分析、测试和验证无线通信系统

无线工程团队使用 MATLAB^® 和 Simulink^® 来缩短开发时间，尽早解决设计问题，并简化分析、测试和验证。使用这些工具可以：

适用产品：无线通信

Design, simulate, and analyze the physical layer of communications systems

Simulate, analyze, and test 5G communications systems

Simulate, analyze, and test the physical layer of LTE and LTE-Advanced wireless communications systems

Simulate, analyze, and test WLAN communications systems

Simulate, analyze, and test Bluetooth communications systems

Simulate, analyze, and test satellite communications systems and links

Test wideband wireless systems and perform spectrum monitoring

Design and implement wireless communications subsystems for FPGAs, ASICs, and SoCs

Create Waveforms Using Wireless Waveform Generator App (Communications Toolbox)
Create, impair, visualize, and export modulated waveforms.
GPS Waveform Generation (Satellite Communications Toolbox)
Generate a complex baseband GPS waveform.

Deep Learning Data Synthesis for 5G Channel Estimation (5G Toolbox)
Generate deep learning training data for channel estimation using 5G Toolbox™.
OFDM Autoencoder for Wireless Communications (Communications Toolbox)
Model an end-to-end orthogonal frequency division modulation (OFDM) communications system with an autoencoder to reliably transmit information bits over a wireless channel.

RF Propagation and Visualization (Communications Toolbox)
Visualize coverage maps, SINR maps, and propagation paths in outdoor and indoor environments.
WLAN Channel Models (WLAN Toolbox)
Using WLAN channel models to add channel impairments to WLAN transmissions.
Propagation Channel Models (LTE Toolbox)
Describes the implementation of channel models specified by the LTE standard and corresponding functions in the LTE Toolbox™ product.
Visualize CDL Channel Model Characteristics (5G Toolbox)
Visualize CDL channel characteristics and explore channel information about the antenna element, element pattern, and cluster paths.
Simulate and Visualize Land Mobile-Satellite Channel (Satellite Communications Toolbox)
Model and visualize a two-state semi-Markov chain LMS channel.

802.11ad Waveform Generation with Beamforming (WLAN Toolbox)
Beamform an IEEE^® 802.11ad™ waveform with a phased array.
Massive MIMO Hybrid Beamforming (Communications Toolbox)
Observe hybrid beamforming at the transmit end of a massive MIMO communications system, using techniques for both multi-user and single-user systems.
NR SSB Beam Sweeping (5G Toolbox)
Employ beam sweeping at gNB and UE and learn about beam management procedures during initial access.

Power Amplifier Characterization (Communications Toolbox)
Characterize a power amplifier using measured input and output signals of an NXP Airfast PA.
EVM Measurement of 5G NR Downlink Waveforms with RF Impairments (5G Toolbox)
Measure EVM of NR-TM or NR-FRC waveforms with phase noise and memoryless nonlinearity impairments.
End-to-End QAM Simulation with RF Impairments and Corrections (Communications Toolbox)
Visualization capabilities that show the effects of RF impairments and corrections in a satellite downlink.

5G LDPC Block Error Rate Simulation Using the Cloud or a Cluster (Communications Toolbox)
Use the cloud or a cluster for block error rate (BLER) simulation of low-density parity-check (LDPC) coding for the 5G NR downlink shared transport channel (DL-SCH).
Wireless Communications Design for ASICs, FPGAs, and SoCs (Communications Toolbox)
Design wireless communication algorithms for hardware by using Wireless HDL Toolbox™ blocks.

OFDM Wi-Fi Scanner Using SDR Preamble Detection (Wireless Testbench)
Retrieve Wi-Fi^® network information from captured OFDM packets.
Recover and Analyze Packets in 802.11 Waveform (WLAN Toolbox)
Blindly detect, decode, and analyze IEEE 802.11™ packets in a waveform.
Bluetooth BR/EDR Waveform Generation and Transmission Using SDR (Bluetooth Toolbox)
Generate and transmit Bluetooth BR/EDR waveform by using SDR.